Waste Plastic to fuel Oil Plant

Input Raw Material : Mixed Waste Plastic 

Output Products : Fuel Oil, Black Carbon Powder

Capacity Per Batch :  1 Metric Ton Per Day

Land Requirement : 2000 Square Feet

Material of Machine :  Mild Steel /Stainless Steel /Boiler Quality 

The Waste Plastic Pyrolysis Plant is capable of recycling 1000 Kg of mixed plastic wastes. it is the smallest unit that we can use to end the non recyclable  plastic with a good source of income.

This product is fully made in India it consist of a horizontal reactor constructed of stainless steel, boiler quality or stainless steel or mild steel as per requirement. The device is secured with fourteen integrated safety that makes our product different from all others.

 

After processing the waste plastics in our machine we get mainly three outputs 

1. Gas

2. Fuel

3. Carbon

Fuel Oil :  fuel Oil is  main product that we recover after pyrolysis process  we receive approximately 55-60% of  total raw material used the oil received from waste plastic can be used in burners of Boilers, furnace, hot air generator, hot mix plant, thermic fluid heater, brick factories, heavy industrial burners and other burners.
The Oil can be further distilled to use as a bio diesel it can be replaced with applications of diesel as well as we can operate vehicles like truck, tractor and other automobiles. It’s demand is increasing day by day. After the research and development in this field  may be in future we can use this oil in all sectors industrial, commercial and automobile etc
Gas:  Non-condensable gas produced in the pyrolysis process can be used for heating the plant.
Carbon Powder:  Carbon powder is the last output product that we get after the process of pyrolysis. this carbon powder can be sold to the industries manufacturing briquetting for burning, Refining, Paint, new tire, shoe pole

Both the tire and waste plastic can be process in the same plant

• Best quality of catalyst for higher oil quality

• ISO 9001 : 2015 Certified company

• Germany based technology more secure-more safe

• Rapid installation of machine

• Easy maintenance

• Easy to operate and control the machine

• CE certified technology

• After sales support

Industrial Waste Plastic Pyrolysis Plant

Input Raw Material : Mixed Waste Plastic, Tyre  

Output Products : Fuel Oil, Black Carbon Powder, Gas 

Capacity Per Batch :   3 Metric Tons Per Day

Land Requirement : 4000 Square Feet

Material of Machine :  Mild Steel /Stainless Steel /Boiler Quality

Pyrolysis Machine Project

Input Raw Material : Mixed Waste Plastic, Scrap Tyre, Rubber

Output Products : Fuel Oil, Black Carbon Powder, Gas 

Capacity Per Batch :   5 Metric Tons Per Day

Land Requirement : 5000 Square Feet

Material of Machine :  Mild Steel /Stainless Steel /Boiler Quality

Commercial Waste to Fuel Project

Input Raw Material : Mixed Waste Plastic, Tyre  

Output Products : Fuel Oil, Black Carbon Powder, Gas 

Capacity Per Batch :   10 Metric Tons Per Day

Land Requirement : 10000 Square Feet

Material of Machine :  Mild Steel /Stainless Steel /Boiler Quality

Test analysis Report of Waste Plastic Pyrolysis Oil

S.NO Test parameter Result / observation
1 Density at 15 degree celcius 0.83
2 Sulpher content 180ppm
3 Carbon Residue 0.049
4 Gross Calorific Value 45351.1
5 Viscocity 4.5